Rolled Steels

CHEMICAL COMPOSITION (IN PERCENTAGE)
Grade	C (Max)	Mn (Max)	P (Max)	S (Max)	Si (Max)	Cr	Ni	Mo	Nitrogen (Max)	Cu / Others
301	0.15	2.00	0.045	0.030	1.00	16.00 - 18.00	6.00 - 8.00	-	0.10	-
304	0.08	2.00	0.045	0.030	0.75	18.00 - 20.00	8.00- 10.50	-	0.10	-
304L	0.030	2.00	0.045	0.030	0.75	18.00 - 20.00	8.00- 12.00	-	0.10	-
310S	0.08	2.00	0.045	0.030	1.50	24.00- 26.00	19.00 - 22.00	-	-	-
316	0.08	2.00	0.045	0.030	0.75	16.00 - 18.00	10.00 - 14.00	2.00 - 3.00	0.10	-
316L	0.030	2.00	0.045	0.030	0.75	16.00 - 18.00	10.00 - 14.00	2.00 - 3.00	0.10	-
317	0.08	2.00	0.045	0.030	0.75	18.00 - 20.00	11.00 - 14.00	3.00 - 4.00	0.10	-
317L	0.030	2.00	0.045	0.030	0.75	18.00 - 20.00	11.00 - 15.00	3.00 - 4.00	0.10	-
321	0.08	2.00	0.045	0.030	0.75	17.00 - 19.00	9.00 - 12.00	-	0.10	Ti5 ( C + N ) Min or 0.70 max
347	0.08	2.00	0.045	0.030	0.75	17.00 - 19.00	9.00 - 13.00	-	-	Cb= 10x ( C Min ) or 1.00 Max
409	0.08	1.00	0.040	0.010	1.00	10.50 - 11.75	0.50	-	-	Ti= 6x (C+ N ) Min or 0.70 Max
409M	0.03	0.81.2	0.030	0.030	0.40.75	11.00- 12.00	1.5 max.	-	-	Ti= 6x (C) Min or 0.70 Max
410S	0.08	1.00	0.040	0.030	1.00	11.50- 13.50	0.60	-	-	-
410	0.15	1.00	0.040	0.030	1.00	11.50- 13.50	0.75	-	-	-
420	0.35	0.50	0.035	0.015	0.50	12.00 - 13.00	0.20.3	-	-	-
430	0.12	1.00	0.040	0.030	1.00	16.00 - 18.00	0.75	-	-	-
JSL AUS	0.08	7.08.0	0.070	0.030	0.75	15.50 - 16.50	4.25 - 4.75	-	-	0.9 - 1.10
JS- 203	0.08	9.2510.25	0.070	0.030	0.75	14.25 - 15.25	2.25 - 2.75	-	-	1.60- 2.0
301M	0.10	4.55.5	0.060	0.030	0.75	14.50 - 15.50	6.0 - 7.0	-	-	1.70- 1.90
* Thickness of 1.27mm & below will have elongation of 20% min.

PSL	Delivery Condition	Pipe Grade
PSL1	As-rolled, normalized, normalizing formed	A
	As-rolled, normalizing rolled, thermomechanical rolled, thermo-mechanical formed, normalizing formed, normalized, normalized and tempered or if agreed Q&T SMLS only	B
	As-rolled, normalizing rolled, thermomechanical rolled, thermo-mechanical formed, normalizing formed, normalized, normalized and tempered	X42, X46, X52, X56, X60, X65, X70
PSL2	As-rolled	BR, X42R
	Normalizing rolled, normalizing formed, normalized or normalized and tempered	BN, X42N, X46N, X52N, X56N, X60N
	Quenched and tempered	BQ, X42Q, X46Q, X56Q, X60Q, X65Q, X70Q, X80Q, X90Q, X100Q
	Thermomechanical rolled or thermomechanical formed	BM, X42M, X46M, X56M, X60M, X65M, X70M, X80M
	Thermomechanical rolled	X90M, X100M, X120M
	Note: The suffix (R, N, Q or M) for PSL2 grades belongs to the steel grade.

Steel Grade	C (max)	Mn (max)	P (max)	S (max)	V (max)	Nb (max)	Ti (max)
[Enter Steel Grade]	[Enter C max]	[Enter Mn max]	[Enter P max]	[Enter S max]	[Enter V max]	[Enter Nb max]	[Enter Ti max]

Steel Grade	C (max)	Mn (max)	P (max)	S (max)	V (max)	Nb (max)	Ti (max)
A	0.22	0.9	0.3	0.3	–	–	–
B	0.28	1.2	0.3	0.3	c,d	c,d	d
X42	0.28	1.3	0.3	0.3	d	d	d
X46	0.28	1.4	0.3	0.3	d	d	d
X52	0.28	1.4	0.3	0.3	d	d	d
X56	0.28	1.4	0.3	0.3	d	d	d
X60	0.28 e	1.40 e	0.3	0.3	f	f	f
X65	0.28 e	1.40 e	0.3	0.3	f	f	f
X70	0.28 e	1.40 e	0.3	0.3	f	f	f

a. Cu ≤ 0.50%, Ni ≤ 0.50%, Cr ≤ 0.50%, and Mo ≤ 0.15%
b. For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for Mn is permissible:
- Up to a maximum of 1.65% for grades ≥ L245 or B, but ≤ L360 or X52
- Up to a maximum of 1.75% for grades > L360 or X52, but < L485 or X70
- Up to a maximum of 2.00% for grade L485 or X70
c. Unless otherwise agreed, Nb + V ≤ 0.06%
d. Nb + V + Ti ≤ 0.15%
e. Unless otherwise agreed.
f. Unless otherwise agreed, Nb + V = Ti ≤ 0.15%
g. No deliberate addition of B is permitted and the residual B ≤ 0.001%

Steel Grade	Mass fraction, % based on heat and product analyses									Carbon Equivalent^a
Steel Grade	C (max)^b	Si (max)	Mn (max)^b	P (max)	S (max)	V (max)	Nb (max)	Ti (max)	Other (max)	CE IIW	CE Pcm
[Enter Grade]	[C]	[Si]	[Mn]	[P]	[S]	[V]	[Nb]	[Ti]	[Other]	[CE IIW]	[CE Pcm]

Steel Grade	Mass fraction, % based on heat and product analyses									Carbon Equivalent^a
Steel Grade	C (max)^b	Si (max)	Mn (max)^b	P (max)	S (max)	V (max)	Nb (max)	Ti (max)	Other (max)	CE IIW	CE Pcm
BR	0.24	0.4	1.2	0.025	0.015	c	c	0.04	e,l	0.43	0.25
X42R	0.24	0.4	1.2	0.025	0.015	0.06	0.05	0.04	e,l	0.43	0.25
BN	0.24	0.4	1.2	0.025	0.015	c	c	0.04	e,l	0.43	0.25
X42N	0.24	0.4	1.2	0.025	0.015	0.06	0.05	0.04	e,l	0.43	0.25
X46N	0.24	0.4	1.4	0.025	0.015	0.07	0.05	0.04	d,e,l	0.43	0.25
X52N	0.24	0.45	1.4	0.025	0.015	0.1	0.05	0.04	d,e,l	0.43	0.25
X56N	0.24	0.45	1.4	0.025	0.015	0.10f	0.05	0.04	d,e,l	0.43	0.25
X60N	0.24f	0.45f	1.40f	0.025	0.015	0.10f	0.05f	0.04f	g,h,l	As agreed
BQ	0.18	0.45	1.4	0.025	0.015	0.05	0.05	0.04	e,l	0.43	0.25
X42Q	0.18	0.45	1.4	0.025	0.015	0.05	0.05	0.04	e,l	0.43	0.25
X46Q	0.18	0.45	1.4	0.025	0.015	0.05	0.05	0.04	e,l	0.43	0.25
X52Q	0.18	0.45	1.5	0.025	0.015	0.05	0.05	0.04	e,l	0.43	0.25
X56Q	0.18	0.45f	1.5	0.025	0.015	0.07	0.05	0.04	e,l	0.43	0.25
X60Q	0.18f	0.45f	1.70f	0.025	0.015	g	g	g	h,l	0.43	0.25
X65Q	0.18f	0.45f	1.70f	0.025	0.015	g	g	g	h,l	0.43	0.25
X70Q	0.18f	0.45f	1.80f	0.025	0.015	g	g	g	h,l	0.43	0.25
X80Q	0.18f	0.45f	1.90f	0.025	0.015	g	g	g	i,j	As agreed
X90Q	0.16f	0.45f	1.9	0.02	0.01	g	g	g	j,k	As agreed
X100Q	0.16f	0.45f	1.9	0.02	0.01	g	g	g	j,k	As agreed

Welcome to Rolled Steels